The key to press during boot to enter the setup varies by manufacturer. Restart your computer and enter the UEFI/BIOS setup.In some cases, you can control fan speed directly from the UEFI/BIOS setup: Copy the paths of the sensors into the /etc/nf file and set the fan speed levels. Edit the /etc/default/thinkfan file to set START=yes. Edit the /etc/modprobe.d/nf file to set options thinkpad_acpi fan_control=1. If you’re using a ThinkPad, you can use the thinkfan package to control fan speed: Use the command sudo service fancontrol start. Edit the /etc/fancontrol file to adjust the fan speed according to your preference. Run sudo pwmconfig and follow the prompts to detect and configure fans. This will load the new modules into the kernel. You can use any text editor for this, such as nano or vim. Insert the modules detected by sensors-detect into this file. This will detect all sensor chips on your system. Run sudo sensors-detect and answer YES to all questions. Sudo apt-get install lm-sensors fancontrol You can do this by running the following command in the terminal: Install the lm-sensors and fancontrol packages.The lm-sensors and fancontrol packages are powerful tools for controlling fan speed. Conclusion Using lm-sensors and fancontrol.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |